The Fuel tank 5052 Aluminum sheet is AL-Mg series alloy aluminum sheet plate, which is the most widely used anti-rust aluminum alloy. The Fuel tank 5052 Aluminum sheet has high strength, especially fatigue strength, high plasticity and corrosion resistance, and good weldability....
1 The Introduction of Fuel tank 5052 Aluminum sheet
The Fuel tank 5052 Aluminum sheet is AL-Mg series alloy aluminum sheet plate, which is the most widely used anti-rust aluminum alloy. The Fuel tank 5052 Aluminum sheet has high strength, especially fatigue strength, high plasticity and corrosion resistance, and good weldability.
With the mass production of tank trucks, problems such as how to save energy, improve functions, save materials and reduce costs have arisen. Take the tanker fuel tank as an example,if the fuel tank plate uses a good material, so that long-term use is to save materials. Moreover, the price of the Fuel tank 5052 Aluminum sheet has a higher advantage than other materials. Therefore, the Fuel tank 5052 Aluminum sheet is energy-saving and environmentally friendly,and can be used for a long time.
2 The Product specification of Fuel tank 5052 Aluminum sheet
* Alloy: 5052
* Material temper: O, H111, H112, H114, H116, H32, etc;
* Thickness (mm): 4-8mm, the normal thickness are generally: 5, 6, 7, 8mm;
* Width (mm): 1500mm-3450mm
The typical width of tanker body/Cylinder and Bulkhead/Wash Board: 1500/1600/1800/2000/2200/2400mm
* Length (mm): 500-16000mm
Typical length: 5500/5750/6000/7500/7850/8600/11800mm
* Production standards: GB/T 3880, EN14286, EN485, ASTM B209, or according to customer's special requirements
* Applicable fields: fuel tank materials, molds, anodizing materials, trolley boxes, 3C products, automobiles, silos, etc.
* Appearance Parameter
|
Type |
Standard Plate |
High Class Plate |
Bright Plate |
Mirror Plate |
|
Roughness Ra/μm |
0.5-0.8
|
0.3-0.5 |
0.1-0.3
|
≤0.04
|
|
Product Description |
Smooth Surface Defect deepness ＜Minus Tolerances of Thickness |
Fine and Smooth surface No or only very little colour aberration and chatters |
Bright,fine and smooth surface No colour aberration and chatters |
Mirror reflective surface Reflecance ≥86% |
|
Applicable Standards |
GB/T 3880 |
EN14286/ASTM B209 EN485 Or depend on Customer’s special requirements |
EN14286/ASTM B209 Or depend on Customer’s special requirements |
EN14286/ASTM B209 Or depend on Customer’s special requirements |
|
Application |
Use directly or after brashing Cylinder, Head, Bulkhead, Wash Board |
Directly Use
Cylinder, Head, Bulkhead, Wash Board |
Directly Use
Cylinder, Head,
|
Directly Use
Cylinder, Head,
|
3 The Chemical composition and Mechanical properties of Fuel tank 5052 Aluminum sheet
1) The Chemical composition of Fuel tank 5052 Aluminum sheet
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Other |
AL |
|
|
single |
total |
|||||||||||
|
5052 |
0.25 |
0.40 |
0.10 |
0.10 |
2.2 -2.8 |
0.15 -0.35 |
- |
0.10 |
- |
0.05 |
0.15 |
Remainder |
2)The Mechanical properties of Fuel tank 5052 Aluminum sheet
|
Alloy |
Temper |
Thickness (mm) |
Mechanical properties |
|||
|
Tensile Strength（Mpa） |
Yield strength （Mpa） |
Elongation (%) |
Minimum Bending Radius of 180 Degree |
|||
|
standard value |
standard value |
A50 |
|
|||
|
Not less than |
||||||
|
5052 |
O/H111 |
4-8mm |
170-215 |
≥65 |
≥18 |
--- |
|
5052 |
H32 |
4-8mm |
210-260 |
≥130 |
≥10 |
--- |
4 The Product features of Fuel tank 5052 Aluminum sheet
1) The Fuel tank 5052 Aluminum sheet has good corrosion resistance;
2) Fuel tank 5052 Aluminum sheet has Excellent weldability ;
3) Fuel tank 5052 Aluminum sheet has better cold workability
4) The Fuel tank 5052 Aluminum sheet has medium strength.
5 The Application of Fuel tank 5052 Aluminum sheet
Fuel tank 5052 Aluminum sheet is mainly used to manufacture fuel tank for tank trucks, and also can be used to manufacture molds, silos, etc.
